Mechanical Accesories

TRM supplies it's controllers in 2 basic case styles for either cabinet mounting or pedestal/arm mounting. For the cabinet mounting case it is simply a matter of cutting the appropriately sized hole for the controller selected. For pedestal mounting the case comes with blind nutserts for bolting in place. TRM can also supply mounting arms for this style of case to mount on machines where the angle needs to be adjusted or possibly the reach. The popular models are:


	Short Arm Mounting Bracket Adjusts for tilt (up-down), rotation and pan (left-right). Swivels at wall through 170° Tilts 180° Head will rotate through 360° Faceplate sits 130mm from the wall Max loading weight of 10kg TRM Ref: A-BRACKET-504

	Medium Arm Mounting Bracket Adjusts for tilt (up-down), rotation, pan (left-right) and reach. One piece construction requires no assembly - simply fix to the wall then attach the controller Slim line wall plate ideal for fixing to studded walls 180° Swivel & 45° tilt Lightweight aluminium construction GS/TUV Approvals Max screen weight: 15kg Faceplate to Wall: Min 50mm, Max 240mm TRM Ref: A-BRACKET-502

	Long Arm Mounting Bracket Adjusts for tilt (up-down), rotation, pan (left-right) and reach. 180° Swivel & 45° tilt Lightweight aluminium construction GS/TUV Approvals Max screen weight: 15kg Long reach dual arm design Faceplate to Wall: Min 50mm, Max 370mm TRM Ref: A-BRACKET-507

	HQ Long Arm Mounting Bracket Adjusts for tilt (up-down), rotation, pan (left-right) and reach. Max. 15 kg +/- 28° inclination range Dual joint arm, swivels by 180° 360° rotation Distance to wall approx. 95 – 385 mm Integrated cable management Integrated spirit level and theft protection Much lighter than standard steel designs because made of aluminium TÜV / GS approved This is a higher quality version of the normal Long Arm bracket. TRM Ref: A-BRACKET-508

	Post Mounting Long Arm Fits any 30-60mm diameter pole and adjusts for tilt (up-down), rotation, pan (left-right) and reach. Will hold up to 10kg Can be mounted on horizontal or vertical pole Allows controllers to be tilted, swivelled or rotated Twin arm allows for greater movement Cable management clips Maximum arm reach: 440mm TRM Ref: A-BRACKET-509

	Motor Mount - no gearing The T1 is supplied as an angle bracket only and built up to suit the machine requirements. Output shafts the motor to which we can mount many pulley sizes as required by the application. TRM Ref: T1

	Motor Mount - gearing The T2 is supplied as an angle bracket only and built up to suit the machine requirements. Output shaft gearing can be altered as needed and the tensioning bearing adjust to remove any slack. TRM Ref: T2

	Sensor Mount The TRM sensor mount is ideal for mounting proximity switches, being aluminium it does not easily interfere with the sensor and is pliable allowing small bends to be made to ensure the sensor is accurately positioned. TRM Ref: A-BRACKET-101

Mechanical Accesories

Contact